Thermomodification of wood happens at high temperature (170-220 °C) and lack of air, without any chemical additives, keeping the natural environmental friendliness and beauty. In the price of the equipment it is included: the camera of heat treatment, rail system with mechanical loading / unloading, automatic equipment. Costs of the electric power average250 kW on 1 cbm. wood for all cycle of modification. The recommended humidity of wood before thermal modification is 8 – 10%. The term of thermal modification of wood – 60 – 85 hours (depending on thickness and breed of wood). Camera of heat treatmentthe thick-walled case of 10 - 14 mm outside warmed screened (20 mm) and usual (100 mm) mineral wool, sheathed by sheets of a metalprofile has (thermomodifications) of wood. The heat chamber is equipped with automatic equipment which provides control of the temperature and hour conditions with high precision. Nagrevalny elements have maximumheat removal from electro ten that promotes economy of electricity and a uniform color of thermowood on length and height of a stack. The rail system has independent mechanical loading / unloading of a trolley for timber which is made by means of an electro reducer. Barrier fittings and a pipe for emissioncouple from stainless steel that provides the bigger term of operation. The hinged mechanism of a krishka of the camera is made in such a way that closing / opening is carried out by one worker. Zakryvny bolts external cap – for convenience of closing / opening of a cover. Prisloneny covers to the case it is provided by itin the way that to prolong service life of sealant twice (7 – 10 loadings). Sealant replacement very convenient and fast, thanks to guides on the camera case. Struptsinny mechanisms with convenient clips provide tough deduction of timber on all cycle of thermomodification that promotes to avoid a wood curvature.Qualitative silicone sealant and heat-resistant silicone for gluing, raise service life twice. The mounted side holder of a cap provides his deduction in open form. The enterprise tests the equipment in operating modes before departure to the Customer. We make control and start of the equipment, andalso we provide training of personnel. Each buyer is given the chance to visit our production, to get acquainted with prototypes on production base, to try the equipment on the material or a product. Always we will help, we will advise, we will share skilled information.